Essential details
MOQ:5000
Lead time:30 days after received the paytment
Size:L(300)*W(45)*H(0.003) cm
Shipping:Sea transportation
Product Introduction
| Features | Stop End Mesh | Traditional Wooden / Steel Formwork |
|---|---|---|
| Dismantling | Permanent non-dismantling | Must be dismantled |
| Construction Joint Treatment | Automatically form rough shear-resistant interface | Manual chipping and cleaning required |
| Special-shaped Construction | Flexible bending & strong adaptability | Difficult formwork support & high loss |
| Construction Efficiency | High (save dismantling & chipping processes) | Low (cumbersome procedures & labor-intensive) |
| Cost | Slightly higher material cost, lower overall cost | Low material cost, high labor & schedule cost |
About hy-rib/High rib lath:
Material: Mainly stamped and formed from hot-dip galvanized cold-rolled steel sheet(or seamless steel) with a thickness of 0.3mm to 0.8mm. It features excellent toughness and corrosion resistance.
Structure:
- Mesh hole: Mostly honeycomb or diamond shaped, which allows cement slurry to penetrate while preventing aggregate leakage.
- Rib frame: Equipped with V-shaped or U-shaped three-dimensional ribs to provide lateral rigidity and resist concrete pouring pressure.
- Edge: Designed with hook-shaped or tongue-shaped protrusions. After pouring, it embeds into concrete to form a mechanically occluded key structure.
Core Features & Advantages:
Permanent non-demolition, high efficiency and labor savingAs a permanent formwork, it requires no removal after concrete pouring. It eliminates procedures such as formwork dismantling, chipping and cleaning, shortening the construction period by more than 30%.Excellent mechanical properties- High lateral pressure resistance: The V-shaped ribs provide supporting strength, with a pressure bearing capacity of about 60% of traditional formwork, reducing keel support usage by 40%.
- Firm interface bonding: The mesh structure forms a rough surface, which ensures high bonding strength between new and old concrete with great shear and tensile resistance.
Convenient construction and strong adaptability- Lightweight and flexible: Its weight is only 1/10 of traditional steel formwork. It can be bent and cut freely to fit special-shaped structures such as curved surfaces and arcs.
- Easy reinforcement installation: The porous mesh allows steel bars to pass through and bind conveniently.
Controllable quality & reduced common defects- Visible pouring construction: Concrete pouring condition can be directly observed through mesh holes, effectively reducing honeycombs and voids.
- High-quality construction joints: The mechanical key joints are compact and impermeable, greatly lowering the risk of water leakage.
